Before using the MARSHINE 5T Diesel Engine Power Cable Winch, please first check the key parts of this machine. You need to look over the belt drive system to make sure the belt isn’t loose or cracked. If the belt is slacked, you can adjust the tension bolts to make it’s tight yet efficient. And you also need to inspect the steel cable for the frays or the kinks too, you can run your hand along the cable to feel whether there has the rough spots. And please remember to replace the steel cable if there are more than 5 broken wires in any 100mm section. About the electric model, please test the power cord for the frays and make sure the 4KW motor connects properly to the power source.Then you need to set up the cable winch for your task. If you want to do the tower line construction or the cable laying, please place the cable winch on the flat and stable surface. Please place it at the direction of the load so the cable will pulls straight, which can let this stops the cable from the rubbing against the drum and wearing out. You can use the mounting holes on the base to fix it with the bolts if needed, especially for the heavy-duty traction tasks.
When starting to operate, first you need to select the right gear of the MARSHINE 5T Diesel Engine Power Cable Winch. For the 5T heavy loads, please use I gear, which has the lower speed and the more traction force that you can pull the heavy-duty cables steadily. For the lighter loads or need to faster movement items, please switch to II gear, which has boosts speed that can make it quicker to lay the lighter wires. Before you want to operation this cable winch, please hold the control handle firmly and start the winch slowly, don’t yank the handle or start this machine at full speed, as this can make the load jerk.
While the MARSHINE 5T Diesel Engine Power Cable Winch is running, please keep an eye on the cable and the loads, you need to make sure the cable wraps neatly around the drum. If the cable starts to bunch up, you need to stop the winch and adjust it by your hand. After use, please turn off the power first. Then unplug the power cord and wrap it neatly. You can store this cable winch in a dry place to prevent the rust on the drum and the belt.
-
Teams
